Kmc-controls CTE-5202W Manuale Utente Scaricare il pdf

CTE-5202 Electronic Room Thermostat with LCD Display 1 Installation and Operation Guide

1. Ifthethermostatislockedonthebackplate,turn

thetwohexscrews(inthetwo outermost holes)

inthebackplateCLOCKWISEuntilthey(just)

clearthecover.Swingthethermostatupand

awayfromthebackplatetoremoveit.

Installation and Operation Guide

Electronic Room Thermostat with LCD Display

CTE-5202

Installation

Rough-in Preparation

For optimum temperature sensor performance, the

thermostat must be mounted on an interior wall

and away from heat sources, sunlight, windows,

air vents, and air circulation obstructions (e.g.,

curtains, furniture).

Ifreplacinganexistingthermostat,labelwiresas

neededforreferencewhenremovingtheexisting

thermostat.

Completerough-inwiringateachlocationpriorto

thermostatinstallation.Cableinsulationmustmeet

localbuildingcodes.

Installation 1

Rough-in Preparation 1

Mounting and Wiring 1

Operation 2

Change Setpoint 2

Change Conﬁguration 2

External Input (AI1) 4

Maintenance 4

Accessories 4

Additional Resources 4

Important Notices 4

CAUTION

To prevent damage to the board, do not insert

a screwdriver into any holes other than the two

outermost holes. To prevent mounting screw heads

from touching the circuit board in the thermostat, use

only the mounting screws supplied by KMC Controls.

Using other screws may damage the thermostat. Do

not turn screws in farther than necessary to remove

the cover.

2. Routethecablethroughthebackplate.

AI1

AO1

AO2

SET

POINT

A B C D E

3.25in. 5.16in. 0.88in. 3.25in. 0.15in.diameter

83mm 116mm 22mm 83mm 3.81mmdiameter

Mounting and Wiring

ThethermostatmustNOTbe:

• Mountedonanexteriorwall.

• Mountedonornearalargethermalmass(e.g.,

concreteblockwall).

• Blockedfromnormalaircirculationbyobstruc-

tions.

•

Exposedtoheatsources(e.g.,lights,computers,

copiers,orcoeemakers)ortosunlight(atany

timeoftheday).

• Exposedtodrasfromwindows,diusers,or

returns.

•

Exposedtoairowthroughtheconduit(from

leaksinplenumducts)—putplumber’spuyor

similarmaterialinsidetheconduittoblockair

ow.

NOTE: For specications and other information,

see the CTE-5202 Data Sheet.

NOTE: For detailed applications, cross-references,

accessories, and other information, see the

CTE-5202 Applications Guide.

1 2 3 4

Sommario

Pagina 1 - CAUTION

CTE-5202 Electronic Room Thermostat with LCD Display 1 Installation and Operation Guide1. Ifthethermostatislockedonthebackplate,turnt

Pagina 2 - Operation

CTE-5202 Electronic Room Thermostat with LCD Display 2 Installation and Operation GuideOperationChange SetpointTochangethesetpoint:1. Pusht

Pagina 3 - SEQUENCE # 2:

CTE-5202 Electronic Room Thermostat with LCD Display 3 Installation and Operation GuideNOTE: AO1istypicallyusedtocontrolthecool-ingout

Pagina 4 - Important Notices

CTE-5202 Electronic Room Thermostat with LCD Display 4 Installation and Operation GuideAccessoriesMaintenanceRemovedustasnecessaryfromholes

Modelli collegati CTE-5202

Commenti su questo manuale

Nessun commento

Kmc-controls CTE-5202W Manuale Utente

Navigare online o scaricare Manuale Utente per Sensori Kmc-controls CTE-5202W. KMC Controls CTE-5202W User Manual Manuale Utente

Sommario

Modelli collegati CTE-5202

Commenti su questo manuale

Prodotti e manuali riguardandi Sensori Kmc-controls CTE-5202W